A search for the words custom packaging inc or packaging inc usually starts a supplier comparison. The useful comparison is a shared specification: product dimensions, finished structure, board or laminate, print coverage, finish, quantity, and destination. The wholesale custom packaging page is the right hub when the quantity discussion is central.
What should a packaging quote name first?
Product fit comes before the outside artwork. Send the packed length, width, and depth, and state whether each measurement is inside or outside the package. Packaging dimensions are normally written as length x width x depth. About 1/16 in, or 1.5 mm, is a common tolerance reference, so both sides should agree on the fit reference before the artwork is placed.
Name the construction next: folding carton, sleeve, mailer, rigid box, bag, insert, or a combination. Include the opening direction, closure, product orientation, window, and internal support. A quote can then describe a real build instead of using custom as a catch-all.
How do I compare packaging materials fairly?
The board choice changes stiffness, surface, and how a folding carton scores.
| Package direction | Typical industry reference | Tradeoff to resolve |
|---|---|---|
| Folding carton | SBS, C1S, or C2S paperboard, 12 to 24 pt | Caliper affects panel stiffness, scoring, and closure fit. |
| Kraft carton | Kraft board, 18 to 24 pt | The natural brown tone changes color appearance and print coverage. |
| Rigid presentation box | Chipboard, 1.5 to 3 mm, wrapped in 100 to 157 gsm art paper | The board holds its shape, while the wrap defines the printed surface. |
| Corrugated outer pack | E, B, or C flute, with 32 ECT as a common reference | Flute choice changes thickness, stacking behavior, and print surface. |
| Flexible barrier format | Mylar or foil laminate with PET / AL / PE layers | The layer stack affects light, moisture, and odor transfer. Ask us about food-contact options for your product. |
These are general industry references. They give two suppliers the same vocabulary for a like-for-like discussion, but product dimensions and handling still decide the practical choice.
What should a custom dieline show?
A dieline is the flat cutting template used to print and cut a package. It should show the panel layout, score lines, glue flaps, tuck flaps, window position, and opening sequence. Keep type, barcodes, seams, and important artwork away from scores and glue areas. Bleed belongs outside the cut line so a small cutting shift does not leave an unprinted edge.
For a sleeve, show the tray or inner pack it wraps. For a drawer or slide, show the pull direction and visible end. For a mailer, show the lid, side walls, and locking path. The digital proof is where fit and artwork meet, before anything prints.
Which structures belong in the comparison?
Straight tuck end and reverse tuck end cartons put their glue areas in different places. Auto-lock bottom and crash-lock constructions change how the base is assembled. A sleeve leaves the inner pack visible. Two-piece rigid, magnetic flap, drawer, and slide formats change the opening sequence and the space needed around the product.
A roll end tuck top mailer, commonly identified as FEFCO 0427, is a reference for a parcel-oriented structure. Choose the structure from the product, closure, pack-out, and shipping role. The name alone is not a fit check.
How do print and finish choices change the quote?
Print coverage is a quote line, not a decorative afterthought. Offset CMYK is commonly used for detailed folding-carton artwork. Digital printing is often considered for short runs or versioned work, while flexo is associated with corrugated graphics. Define coverage as front panel, several panels, or full coverage before comparing quotes.
Matte or gloss lamination changes the surface sheen. Soft-touch changes the hand feel. Spot UV, foil stamping, embossing, and debossing concentrate attention on selected areas. UV coating cures hard and glossy and resists scuffing better than aqueous, but it can crack along score and fold lines and is harder to write on. Aqueous coating dries fast, is water-based, and takes glue and ink well on flaps. At a press check, look at ink coverage, small type, barcode contrast, and the finish edge near scores.
Which CPL products can anchor the discussion?
The catalog gives concrete shapes to compare. Use custom screw packaging for a small-part fit discussion, custom scissor packaging for a longer product profile, custom greeting card packaging for a flat format, and custom drone packaging boxes for component organization. These are real catalog references, not a claim that one structure suits every product.
What belongs in a concise quote request?
A useful request fits on one page.
- Product dimensions, orientation, components, and inside-fit reference.
- Format, closure, insert, window, or mailer construction.
- Board or laminate preference, print coverage, artwork status, and finish.
- Quantity, destination, and the decision the quote must answer.
Custom Packaging Lane quotes to spec from a 100-unit minimum. Pricing is from $0.49 per unit at volume, quoted to spec. Production is typically 8 to 10 business days after proof approval, plus delivery. Free US shipping, free design support, and a free dieline are included. The $19.99 sample kit is credited to the first order.
Frequently Asked Questions
Why does the phrase packaging inc appear in search results?
The phrase packaging inc usually means a buyer is looking for a packaging company or incorporated supplier, not one specific box construction. A useful supplier comparison names the product, inside fit, structure, board or laminate, print coverage, finish, quantity, and destination so each quote describes the same package.
What information makes supplier quotes comparable?
Supplier quotes become comparable when they use the same product dimensions, inside-fit reference, structure, artwork coverage, finish, quantity, and destination. Compare the stated board or laminate, opening pattern, proof stage, and delivery wording. A shared brief exposes price differences that come from different package specifications.
Is 12 to 24 pt a normal carton board reference?
A common folding-carton reference is SBS, C1S, or C2S paperboard in the 12 to 24 pt range. Kraft board is commonly around 18 to 24 pt. Those are starting references, not a fit decision. Check panel size, scoring, closure movement, product clearance, and handling before selecting the board.
Why does the dieline matter before printing?
A packaging dieline matters before printing because it places the panels, cut lines, scores, glue flaps, tuck flaps, opening path, product position, and window or insert location on one flat template. Packaging dimensions are normally length x width x depth, with inside measurements used for fit. The digital proof checks structure and artwork together.
Should I send inside or outside dimensions?
Send both when a packaging quote involves fit and shipping. Inside length, width, and depth describe the product cavity, while outside dimensions describe the formed package that occupies storage and transit space. Label the two measurements separately, and include the product orientation, closure, insert, and clearance that affect usable space.
